Basic Info.
Transmission Medium
Coaxial Cable
Standard
to The GB6993-86 Standard
Lightning Protection
With Lightning Protection
Band Width
Wide Band(Selective Band Available for OEM)
Manual Gain Control
31dbt/ 1dB Step
Coverage Area
1000~5000sqm.
Power Supply
AC 90-264V,DC 9V/5A
Transport Package
Neutral/Customized Packaging
Product Description
WT27-CA80(M)
27dbm high power 4g mobile signal repeater What Is A Cell Phone Signal Booster?
Cell Phone boosters or cell phone repeaters are devices that have been developed to solve the problem of weak cell phone reception. They have been designed specifically to amplify a weak signal available outside a house, building or a vehicle, and to broadcast a much stronger signal inside, where it is needed the most.
We shall discuss in detail how these devices work, but let us first answer the question, are cell phone signal boosters legit? Yes, they most certainly are and have been approved by the FCC in United States and Industry Canada (IC) in Canada.
The FCC has no issue with using cell phone repeaters to extend the range of a cell network in areas that historically receive poor cellular service, including homes and offices, commercial structures and more as long as they are registered with respective service provider before use.
Description:
Indoor Dual Band Signal Repeater (Signal Booster) series is an ideal solution for two wireless system in small/medium businesses and home users looking to enhance indoor wireless connectivity. It is connected via coaxial cable to Donor Antenna and Service Antenna, Donor Antenna is placed outside the building where it has easy access to BTS signal, and the Service Antenna is placed in the building where it can extend radio coverage to the blind area. And Automatic Gain Control (AGC) to avoid the Booster from over saturation, therefore maintaining a high voice quality and avoid adding interference to network. With good looking & super compact design also make it attractive. Besides, it is easy installation feature is also for individual customers to install the booster by themselves, and it does not need much professional knowledge and instrument.
The signal booster improves mobile signals with no negative impact on human health.
Features:
- Cost effective solution for weak signal zones, reduce drop/off calls.
- Compact size, low power consumption, easy installation, great cover.
- Expansion and extending of the signal of base station.
- Optimization of the quality of the signal and source
- Cover about 1000~5000m² without block or obstruct.
- High linear design, ALC function design, low interference to BTS.
- Support any cellular devices (voice & data & video)
- Wide band signal booster, or customize selective band booster.
Advantages:
Digital Display Panel, Intelligent mode setting
Smart function called which can be activated via the digital display panel.
Users can choose gain and working system by LED Digital Panel.
Set the technical parameters simple and efficient, this is easier than DIP Switch.
Standard Package:
1) AC90-264V, DC9V/5A power supply adapter 1PCS
2) AC power cord (EU/US/UK/SA/China standard, etc) 1PCS
3) Installation kit 1PCS
4) User manual 1PCS
Recommended Accessories:
1)Donor antenna: Log Periodic Antenna (9dBi or 11dBi,806-960/1710-2700MHz)
2)Service antenna: Omni Ceiling Antenna (3dBi,806-960/1710-2700MHz)
3)5D-FB coaxial cable with connectors(Cable length optional)
Application:
To expand signal coverage or fill signal blind area where signal is weak or unavailable.
Indoor: Hotels, Home, Basements, Shopping Malls, Offices, Parking Lots, Shop.etc.
Specification:
Frequency Range | Uplink | Downlink |
DCS 1800MHz + WCDMA 2100MHz (Band5 + Band 10) | 824-849/1710-1755MHz | 869-894/2110-2155MHz |
Max. Gain | 75dB±2dB | 80dB±2dB |
Max. Output Power | 24dBm±2dBm | 27dBm±2dBm |
Band width | Wide Band(Selective Band Available for OEM) |
Manual Gain Control | 31dB / 1dB Step |
Automatic Gain Control | >30dB |
Ripple in Band | 8dB |
Noise Figure | ≤ 6dB |
VSWR | ≤ 2.0 |
Intermodulation Products | 9KHz~1GHz | ≤ -36dBm |
| 1~12.75GHz | ≤ -30dBm |
Spurious Emission | 9KHz~1GHz | ≤ -36dBm |
| 1~12.75GHz | ≤ -30dBm |
Time Delay | ≤ 1.5 μs |
Frequency stability | ≤ 0.01ppm |
MTBF | > 50000 hours |
Impedance | 50 ohm |
Power Supply | AC 90-264V,DC 9V/5A |
Power LED | Power indicator |
Alarm LED | Red | Self oscillation or Strong input signal |
| Green | Normal |
Mechanical Specification |
RF Connector | N-Female |
Switch | Power Switch |
Cooling | Heatsink Convection cooling |
Humidity | < 90% |
Operating Temperature | -10°C ~ +55°C |
Environment Conditions | IP40 |
Installation Type | Wall Installation |
Size | 240*268*58mm |
Weight | About 5.5kgs |
How A Cell Phone Signal Booster Works.
A cell phone booster pulls in a weak signal from the outside, boosts it and then rebroadcasts it within the house, building or vehicle. A typical signal booster is based on a three-part system.
It consists of an outside antenna that captures the weak cell signal, an amplifier that boosts the signal thus received, and an inside antenna that rebroadcasts the much enhanced signal within the room, house, building or vehicle.
An outside antenna is mounted in a location outside the house or building which currently gets a signal, usually on the roof. This signal is then passed from outside antenna to a signal amplifier within the building. An amplifier enhances the signal by up to 32X times and then sends it to the inside antenna. An inside antenna rebroadcasts the signal to the area where it is needed the most.
That is how you get a much improved signal from the cellular tower. The same process works in the reverse. The signal from your phone is picked up by inside antenna, enhanced by amplifier and sent out to the outside antenna, which rebroadcasts it so that a much stronger signal is received by the cellular tower. This establishes a strong two-way communication between your phone and the cellular tower.
Amplifier.
An amplifier or a cellular repeater receives the signal from the outside antenna and boosts it by 32X times. Amplifiers are measured in terms of dB (decibel) output. Amplifiers used in home-based systems offer anything from 500 to 20,000 sq. ft. of coverage.
Most exterior cell phone signal strength ranges from -50 dB to -120 dB. In terms of bars, -50 dB means full bars and -120 dB means zero bars or a dead zone. Amplifiers boost the cell phone signal so as to get the reading closer to -50 dB.
You should get a +60 dB gain at least with an amplifier. The best and most powerful amplifiers give you a +70 dB gain. Amplifiers that have been specifically designed for vehicles should give a +25 dB gain at least, with a maximum of +50 dB gain.
If you are able to get a consistent -94dB or better signal outside, then signal amplifier will be able to multiply signal to boost reception indoors substantially. However, the typical cut off point for signal boosters to be able to amplify is -105dB outside signal. If exterior signal is less than that amount, say for example, -115dB, then signal amplifier will not be able to help in such a situation.
Address:
4f, Hongyu Business Building, Gushu Second Road, Xixiang, Bao′an Dist., China (Mainland), Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Computer Products, Consumer Electronics, Health & Medicine, Security & Protection
Management System Certification:
ISO 9001, ISO 9000
Company Introduction:
Shenzhen Wings Technology Co., Ltd, founded in Shenzhen City, China in 2012, is a professional supplier of signal boosters and wireless networking equipment. We provide comprehensive wireless and cell phone signal coverage solutions to boost WiFi and 2G, 3G, 4G, 5G mobile networks. We produce all-in-one wide band consumer signal boosters that support all operators′ networks. Also we manufacture customized selective band repeaters. Not only to improve the mobile signals, but also convert them to WiFi signal.
For places such as examination hall and jails etc where mobile phone usage is not allowed, we produce customized signal jammer per requirement. With professional R&D, standardized manufacturing process and experienced technical support, we can fully guarantee the excellent product quality and on-time delivery to our customers.
Through continuous innovation and hard work, our company has accumulated a wealth of experience in RF communication products and launched many products with industry leading level. Currently, we have clients in more than 50 countries across the world.
Our mission: Continue to create competitive communication and information solutions; Serve better our customers and partners all over the world.
Core Values: Customer-oriented, Professionalism and Innovation.
If you encounter signal-related problems such as weak and unstable signal, you can consult our salesperson. Our senior staff with more than ten years of experience in R&D and production can help you solve related problems. We can also customize the products you need according to your needs.
We will have good service without having a good product. If you don′t know how to use our product, we have a dedicated technician to guide you until you can operate it. If there is any quality problem, we will also help you deal with it. Well, our products are guaranteed for one year. So please rest assured
I look forward to cooperating with you very much. My best friend